Goto Page 2
Goto Page 3


Angels in America
Rehearsal & Construction Images, Page 1


Ripping Two By Laying out the 1st turntable Ready to glue the second layer in place Building the deck
Gluing the turntable Gluing the turntable Attaching the castors Attaching the castors
Building the trap plug adding castors to the turntable Cutting the axle for the turntable Adding halos to the publicity photos
Building the deck frame Building the deck frame The armature for the angel wings The armature for the angel wings
Painting the hutch Triming the turntable Attaching the wall to the turntable fixing some prop chairs
Painting a desk Laying out a grid on a piece of plywood Working on the front of the wall Working on the back of the wall
The centerpoint of the Angle's wings The frame for the angel's wings The director & designer reviewing the light plot Working at the cut off saw
Connecting the angel Flying the angel Angel with wings in Angel with wings out
Rehearsal 4/20/01 Rehearsal 4/20/01 The turntable turning crew in the traproom Rehearsal 4/20/01
Rehearsal 4/20/01 Rehearsal 4/20/01 Rehearsal 4/20/01 Rehearsal 4/20/01

Goto Page 2
Goto Page 3